Messages & abbreviations, Appendix – Garmin GPS 150XL User Manual

Page 99

Advertising
background image

RAIM not available

- The GPS 150XL is unable to cross-check its

position using RAIM. You may continue to
navigate using visual flight rules. Your position
should be verified every 15 minutes using
other navigation sources. If you have selected
a CDI scale other than ‘Auto’, selecting a larger
CDI scale may remove the conditions causing
this message.

RAIM position warn

- RAIM has detected position errors. If you have

selected a CDI scale other than ‘Auto’, selecting
a larger CDI scale may remove the conditions
causing this message.

RAM failed

- The GPS 150XL has detected a failure in its

internal memory. If the message persists, the
GPS 150XL is unusable and should be taken to
an authorized GARMIN service center.

Rcvr needs service

- The GPS 150XL has detected a condition

requiring service in the receiver hardware. The
GPS 150XL should be taken to an authorized
GARMIN service center.

Ready for navigation

- The GPS 150XL is ready for navigation.

Receiver failed

- The GPS 150XL has detected a failure in the

receiver hardware. If the message persists, the
GPS 150XL is unusable and should be taken to
an authorized GARMIN service center.

ROM failed

- The GPS 150XL has detected a failure in its

permanent memory. If this message occurs, the
unit is unusable and should be taken to an
authorized GARMIN service center.

Route is empty

- An attempt has been made to activate an

empty route.

Route is full

- An attempt has been made to add more than

31 waypoints to a route. The GPS 150XL will
not allow more than 31 waypoints per route.

Route wpt deleted

- One or more route waypoints were deleted

while receiving data from the optional PC
Interface Kit.

Route wpt locked

- At least one route waypoint is locked because

the waypoint has been removed from the
Jeppesen NavData®, the data card is missing,
or the data card has failed.

Route wpt moved

- One or more route waypoints were moved at

least 0.33 arc minutes due to a database
change.

RTCM input fail

- The DGPS data signal was being received but

has now been lost. Check wiring.

Searching the sky

- The GPS 150XL is in the search-the-sky mode.

Allow the unit to complete data collection
before turning it off.

APPENDIX

D

MESSAGES &

ABBREVIATIONS

89

150xl manual B 8/4/98 1:10 PM Page 89

Advertising