Wpt key – Garmin GPS 150XL User Manual

Page 48

Advertising
background image

The airport runway page displays runway designations, length, surface and

lighting for the selected airport, as well as ILS/localizer and/or pilot-controlled lighting
frequencies.

To view the runway page from any of the airport information pages:

1. Rotate

O

with the cursor removed to display the runway page.

2. To view additional runway information, rotate

K

with the cursor removed.

The scrolling arrow prompt, located beside the identifier field, indicates which direction to
scroll for additional runway information.

If a localizer and/or ILS are used on the same runway, rotating

K will sequence

through both sets of information.

The following descriptions and abbreviations are used on the airport runway page:

Runway surfaces:

• hard - Hard (concrete, asphalt, etc.)

• turf - Turf (grass)

• seal - Sealed surface

• grav - Gravel surface

• dirt - Dirt surface

• soft - Unknown soft surface

• unkn -Unknown surface

• watr - Water landing site

Runway lighting:

• pt lights - Part-time lights
• ft lights - Full-time lights
• pc - Pilot-controlled (with frequency) lights
• no lights - No runway lighting

38

To view additional runways, rotate the

K

knob in

the direction of the arrow prompts.

Airport runway page for KICT.

SECTION

2

WPT KEY

Airport

Runway Page

150xl manual B 8/4/98 1:09 PM Page 38

Advertising