Garmin GPS 150XL - Manual (Page 30)

Viewing individual satellite information.
SECTION
1
NAV KEY
Satellite Data Page
The third and fourth lines of the satellite status page provide the satellite number
and signal strength of each satellite in view. The satellite status page shows signal
strength for up to eight satellites at a time. If additional satellites are being received
an arrow on the ‘sat’ line will indicate additional data is available.
To view additional satellites:
1. Rotate
K
to view more satellites .
Additional information regarding each satellite’s azimuth, elevation and other data
is also available.
To view individual satellite information:
1. Press N and use O to display the satellite status page.
2. Press
C
to activate the cursor.
3. Use
O
to highlight the satellite number you wish to view and press
E
.
This will display the satellite data page, showing the selected satellite’s number,
elevation angle, rise or fall indication, User Range Accuracy (URA, or the range
measurement accuracy as determined by the satellite), azimuth and signal strength.
To view other satellites:
4. Rotate K to view information for the next satellite.
5. Rotate
O
and press
C
on the satellite status page when you are finished.
20
150xl manual B 8/4/98 1:09 PM Page 20