Marine – Garmin GPSMAP 495 User Manual
Page 104
96
GPSMAP 495 Owner’s Manual
Marine
Marine Mode Pages and Features >
DSC
Navigating to a Position Report or Distress Call
After a Position Report or a Distress Call is received, navigation can
be quickly set to the call location.
To navigate to a Position Report or Distress Call using the
Direct To key:
1. Press
Direct To
.
2. With
Go To (MMSI/Name) highlighted, press ENTER.
To navigate to a Position Report or Distress Call using the
Call List or Log:
1. Highlight the call on the
Call List or Log, and press
Direct To .
2. With
Go To (MMSI/Name) or (DSC) highlighted, press ENTER.
Navigating to a DSC Call
Setting up DSC
The DSC Setup tab allows you to turn DSC on and off. This Setup
tab also allows you to simulate distress calls and position reports
while the unit is in Simulator Mode (see
). Simulating calls
is helpful for practice before connecting to the real system. The
distress call simulator also helps to check if alarms are working
properly.
DSC Setup