Garmin GPSMAP 495 - Manual (Page 167)

GPSMAP 495 Owner’s Manual 159
Appendix > Data Field Options
Cross Track—the distance you are off your course in either
direction, left or right.
Depth (Marine Only)—the depth of water from sonar NMEA input.
Dest Wpt—see Waypoint (Destination).
Distance (Destination)—the entire distance, from beginning to end,
of a route.
Distance (Next)—the distance to the next point on a route.
ETA (Destination)—Estimated Time of Arrival. The estimated time
you will reach your destination.
ETA (Next)—Estimated Time of Arrival. The estimated time you
will reach the next point on your route.
ETE (Destination)—Estimated Time Enroute. The estimated time
required to reach your destination.
ETE (Next)—Estimated Time Enroute. The estimated time required
to reach the next point on your route.
Elevation—the altitude (height) above or below mean sea level
(MSL).
GPS Status—the current status of the GPS receiver, such as “3D
GPS.”
Location (Lat/Lon)—your current location as latitude/longitude
coordinates.
Location (Selected)—your current location described in the
selected units of measure (other than lat/lon).
Max Speed—the maximum speed the unit has moved since last
reset.
Mov Avg Spd—see Trip Avg. Speed (Moving).
Move Timer—see Trip Timer (Moving).
Next Course—the course your route will take you on after you
reach the next waypoint.
Next Turn—the direction of the next turn on an active route.
Next Wpt—see Waypoint (Next).
Odometer—the total distance traveled since the Odometer was
reset.
Pointer—the arrow indicating the direction to travel to the next
point on a route.
Power—the power indicator icon: Battery, External Power, or
Charging.
Speed—your current vehicle speed can be measured in miles per
hour, kilometers per hour, or knots.