Garmin GPS II Plus - Manual (Page 33)

The position format and units
of measure for speed, distance,
position, and altitude are all
u s e r-selectable through the
navigation setup page (see p.
76). The 12/24 hour clock and
time offset options are avail-
able from the system setup
page (see p. 73).
27
The following user-selectable options are available on the Position Page:
Trip Odometer (TRIP)— total distance traveled since last reset.
Trip Timer (TTIME)— total (cumulative) time in which a ground speed
has been maintained since last reset.
Elapsed Time (ELPSD)— hours and minutes since last reset.
Average Speed (AVSPD)— average speed traveled.
Maximum Speed (MXSPD)— maximum speed traveled since last reset.
Altitude (ALT)— vertical distance above sea level.
To reset a timer, speed measurement, or odometer:
1. Highlight the user-selectable field, and press ENTER.
2. Press ENTER to confirm the ‘RESET?’ prompt, or QUIT to exit.
The trip odometer, trip timer, and average speed fields are linked, so resetting
one of these options in one user-selectable field will automatically reset the corre-
sponding data in the other. This allows the information provided in these fields to
always be relative to your current trip.
gps ii + Mon (final?) 2/9/98 4:24 PM Page 27