Garmin GPS II Plus - Manual (Page 92)

Navigation Simulator
The GPS II + ’s simulator mode lets you practice all aspects of its operation without
active satellite acquisition. You can plan and practice trips, enter new waypoints and
routes, and save them for use during normal operation.
To activate the simulator:
1. From the Menu Page, highlight ‘SYSTEMSETUP’ (Fig. 86a), and press ENTER.
2. Highlight the ‘mode’ field, and press ENTER.
3. Select ‘Simulator?’ (Fig. 86b), and press ENTER. desire (from the Position Page).
Once the simulator mode has been activated, use the Position, Compass, or
Highway Page to set your speed and track by highlighting the appropriate field, enter-
ing the desired value, and pressing ENTER. You may also enter a new position if you
desire (from the Position Page).
The GPS II + does not track satellites in simulator mode. Although you can
create and save waypoints and routes while using the simulator mode,
never attempt to use the simulator mode for actual navigation.
!
Fig. 86a
Fig. 86b
86
gps ii + Mon (final?) 2/9/98 4:25 PM Page 86