Garmin GPS II Plus - Manual (Page 61)

55
Selecting a User-Defined Navigation Page (cont.)
The ‘ETE’ field, located in the middle of the bottom of both pages, is a user-selectable field that allows you to
display a variety of navigation values for your trip.
To access the user-selectable field:
1. Highlight ‘ETE’, and press ENTER.
2. Use the keypad to scroll through the possible options.
The following data options are available from the Navigation Pages (see Appendix H):
Estimated Time Enroute (ETE)— the time left to your destination based on your present speed and track.
Estimated Time of Arrival (ETA)— the time of day of your arrival at a destination, based on current
ground speed and track.
Course to Steer (CTS)— the bearing which will give you the most efficient way to stay on course to your
destination.
Crosstrack Error (XTK)— the distance you are off the desired course in either direction. This field will give
you a digital representation of the CDI scale.
Velocity Made Good (VMG)— the speed you are traveling toward the destination.
Turn (TRN)— the amount of correction in degrees needed to travel directly to the destination.
gps ii + Mon (final?) 2/9/98 4:24 PM Page 55