Garmin GPS II Plus - Manual (Page 93)

Dashboard Mounting
The GPS II + can be mounted on the dashboard of an automobile or to another convenient surface using the
two Velcro ™ strips provided with the unit.
To mount the GPS II + using the Velcro strips:
1. Select a location for the unit that provides a clear and unob-
structed view of the sky.
2. Remove the paper strip liners from both pieces of Velcro.
3. Make sure the surface to which you’re adhering the Velcro
is clean and dry. Place the adhesive side of the rough piece
of Velcro on the desired mounting surface, and press into
place.
4. Place the adhesive side of the smooth piece of Velcro on the
bottom of the unit (between the rubber anti-skid bumps), and
press into place.
5. Mount the unit, placing one piece of Velcro on top of the
other.
87
gps ii + Mon (final?) 2/9/98 4:25 PM Page 87