Garmin GPS II Plus - Manual (Page 36)

Fig. 30a
Fig. 30b
30
2. The unit will continue averaging until you have highlighted ‘SAVE?’ and pressed ENTER.
To enter a different waypoint name:
1. Highlight the waypoint name field, and press ENTER (Fig. 30a).
2. Make the appropriate changes, and press ENTER.
3. Highlight ‘SAVE?’, and press ENTER.
Note: To enter a different waypoint symbol or comment, see pp. 36-37.
To add this waypoint to a route:
1. Highlight the ‘add to route number’ field (Fig. 30b), and press ENTER.
2. Enter a route number, press ENTER to confirm the route number, and ENTER again to
save the waypoint.
gps ii + Mon (final?) 2/9/98 4:24 PM Page 30