Garmin GPSMAP 3010C - Manual (Page 30)

22 GPSMAP 3006C/3010C Owner’s Manual
b
asIc
o
PeratIon
> n
avIgatIng to a
d
estInatIon
b
as
Ic
o
pera
tIon
To Go To a new map point (non-map item) from the map:
1. Use the ROCKER to move the pointer to the location you want to go to,
and press NAV.
2. With Go To MAP Point highlighted, press ENTER.
To stop navigation:
1. Press NAV.
2. Highlight Stop Navigation, and press ENTER.
Follow Track and TracBack Navigation
A track is an electronic breadcrumb trail recording or history of your path. The
track currently being recorded is the “active” track. An active track can be stored
or saved in the unit. Both the Follow Track and TracBack options navigate in
the same way. Follow Track uses stored or “saved” tracks; TracBack uses your
current or “active” track.
TracBack allows you to retrace your path using the track log stored in the
receiver’s memory, which eliminates the need to store waypoints along the way.
TracBack routes are created by reducing your track log into a route and activating
an inverted route. When active, a TracBack route leads you through your stored
track log points, so it is a good idea to clear the existing track log before you start
your current trip.
To clear the track log:
1. Press and hold ADJ/MENU to open the Main Menu.
2. Using the ROCKER, highlight the Tracks tab, and then highlight the
Active sub tab.
3. Press the Clear soft key. A confirmation message appears.
4. Press the OK soft key to clear the track log.
Clear soft key