Garmin GPSMAP 3010C - Manual (Page 45)

GPSMAP 3006C/3010C Owner’s Manual 3
M
aIn
P
ages
> M
aP
P
age
M
aI
n
p
aG
es
Use the RANGE Up and RANGE Down keys and the ROCKER to select zoom
ranges and move the map pointer. Two basic map operating modes, Position
Mode and Pointer Mode, determine what cartography (map data) is shown on
the Map Page. Position Mode pans the cartography to keep the current position
marker within the display area, whereas Pointer Mode pans the cartography to
keep the map pointer within the display area.
The GPSMAP 3006C/3010C starts in Position Mode, with your location centered
on the map.
Press up, down, left, or right on the ROCKER to enter Pointer Mode. In Pointer
Mode:
• You can move the map pointer over the map using the ROCKER.
• When the map pointer reaches the edge of the display, the map scrolls
forward under the pointer. Keep in mind that the boat icon moves with the
map scrolling and may go off the screen (you might not be able to see your
current location).
• When the map pointer is stationary, a fixed coordinate location appears in
the position field. The distance and bearing change as the boat’s location
changes.
• When you change the range in Pointer Mode, the map pointer is centered
on the screen.
• To return to Position Mode, press QUIt.
NOtE: When the map pointer reaches the edge of the map, the unit may pause
as it loads new map data.
Geographc name
Map
tem
Land
Map zoom
range
Navads
Boat con
Water
User waypont
Selecting Map Ranges
The map has 28 available range scales from 20 ft to 800 mi (5 m to 1,200 km).
The map zoom range is controlled by the RANGE Up and RANGE Down keys,
with the current range shown at the lower-right corner of the Map Page.
To select a map range:
Press the RANGE Up key to zoom out or the RANGE Down key to
zoom in.
NOtE: The scale value represents the distance from one end of the scale bar to
the other.