Garmin SL60 - Manual (Page 103)

Start Up Displays
The Start Up Sequence runs each time the unit is
powered on. Until the Start Up Sequence is
completed, no other editing or mode selections
work. The Start Up Sequence varies between units
due to installation differences. The initial start up
message is displayed for about three seconds.
Apollo SL60 By II Morrow
Owner
Message
If the owner name has been previously entered (in
System Mode), this page with your name is
displayed for three seconds. No owner info screen is
displayed if the user has not entered the owner
data.
Owner: II Morrow Inc
Memory
Tests
Memory tests are preceded by the following two
second display.
Starting Memory Tests
While the Starting Memory Tests message is
displayed, you may press ENT to bypass most of
the normal tests and go directly to normal
operation.
Note
Bypassing the complete series of tests
should only be done in the case of an
emergency. Use of your Apollo SL50/60 for
IFR flight requires that all of the tests be
performed and passed.
93
Start Up Displays