Garmin SL60 - Manual (Page 76)

2. Turn the Small knob to view the pages for
Airspace Setup.
Airspace Setup Alerts: ON
Y
Airspace Buffers
Three values may be adjusted for Airspace Buffers for
determining CLOSE information: distance, elevation,
and time. CLOSE distance may be from 0 to 99 nm at
one nm intervals. Time values are from 0 to 20
minutes in one minute intervals.
1. While viewing the Airspace Buffer page, press
SEL.
Airspc Buffers: 2nm 10min
2. Turn the Large knob to select the desired value to
change. Turn the Small knob to change the value.
Airspc Buffers: 3nm 10min
3. Press ENT when the desired values have been
selected.
Airspace Selections
Thirteen Airspaces are available for selection: Class B,
B Outer, Class C, C Outer, MOA, Training, Unknown,
Alert, Caution, Danger, Restricted, Prohibited, and
Warning. When Class B or C are “On”, the airspace
warning will be activated when your aircraft crosses the
boundary of each airspace. Altitude is not used as a
factor. When the Outer choice is selected, the airspace
warning will be activated when your aircraft crosses the
outside boundary of the airspace (see page 98).
1. Turn the Small knob to view the desired
Airspace selection page.
66
System Functions
ENT
SEL