Garmin SL60 - Manual (Page 50)

5. You can also select the waypoint by the facility
name. As you turn the Large knob to the “c”, a
“+” may appear.
aPDX +c PORTLAND OR USA
Multiple facilities or cities with the same name will
have a “+” beside the name.
6. Press SEL so the whole name flashes.
aPDX +c PORTLAND OR USA
7. Turn the Small knob to view the waypoints with
the same city or facility name.
aHIO +c PORTLAND OR USA
8. Press INFO to view information about the
selected waypoint.
aHIO +f PORTLAND-HILLSBORO OR USA
9. Press ENT or INFO to leave the function.
Database
Update
The SL50/60 can have its waypoint database
updated to allow you to keep your information
current. Connect your SL50/60 to the serial port of
a PC with the appropriate cable. Use Garmin AT’s
Waypoint Manager software to perform the update.
1. In the Waypoint Database, turn the Large knob
to the Database Update page. Press ENT to start
the updating. No controls may be used until the
update is complete.
Database UPDATE: Press ENT
40
Waypoint Functions
SEL
INFO