AASTRA 4223 Professional for BusinessPhone User Guide - Manual (Page 25)

25 BusinessPhone — Dialog 4223 Professional / Dialog 3213
Outgoing Calls
Notes:
It is not possible to do a new request on a key holding an
already activated request until the existing one is cancelled.
When the Automatic Redial lamp is rapidly flashing, your
telephone is busy and you cannot receive or make new
calls.
The number of redial attempts and how long the function is
active is programmed by your system administrator.
If you have activated a diversion on your telephone, this
function is not available.
If Tandem configuration is activated, the secondary
telephone cannot use this function. See section “
Tandem
configuration ” on page 90.
Cancel
Automatic Redial1
Х Ф
Press the relevant programmable key to cancel the
Automatic Redial request (pre-programmed).
Note: Depending on system programming, the Automatic
Redial request could be cancelled automatically.
Pause
It is possible to pause all of your successfully activated requests by
programming a separate Pause Auto Redial key, see section
“Program a function” on page 101.
Pause Auto Redial
Ô
Press to pause (pre-programmed).
The requests are paused and the key lamps of the Automatic
Redial keys are flashing slowly.
Pause Auto Redial
Х Ф
Press to resume Automatic Redial (pre-programmed).