Spicer Dana Commercial Vehicle Warranty - Manual (Page 29)

Extended Protection Plan Matrix
Ext
end
ed
Prote
ctio
n
Pla
n
Ma
tri
x
Extended Protection Plan Requirements, Limitations, and Exclusions
• Application for purchased warranty must be made within one (1) year of the in-service date of the vehicle to avoid a late
registration fee.
• Vehicles registered beyond the one year limitation are subject to the following late registration fees:
-
Vehicles registered from the 13th month through the 24th month of service require payment of:
• Single Axle: $50 USD/$55 CAD
• Tandem Axle: $100 USD/$115 CAD
• Clutch: $50 USD/$55 CAD
- Vehicles registered from the 25th month through the 36th month of service require payment of:
• Single Axle: $100 USD/$155 CAD
• Tandem Axle: $300 USD/$340 CAD
- Warranty coverage for vehicles registered in the 2nd and 3rd year take effect 30 days from the date of registration.
• Extended warranty is only available for the eligible models listed or referenced herein.
• A Spicer approved synthetic lubricant must be used. Lubricant must be changed per Dana prescribed maintenance
schedules (Reference Dana publication TCMT0021). Lube change records might be requested for verification
purposes.
• Warranty applies exclusively to vehicles licensed and operating in the United States of America or Canada.
• Warranty is transferable to only one subsequent vehicle owner. Warranty is only transferable within the same vehicle
vocation. Changing vehicle vocations voids the warranty coverage.
• Re-rating engine torque above the approved torque capacity of the component, voids the warranty coverage. Dealer/ Pur-
chaser shall be responsible for verifying the engine torque does not exceed the torque capacity of the drivetrain.
• Warranty covers parts and labor per Dana established guidelines.
• Oil to water heat exchangers are not covered under the Dana Extended Protection Plans.
• See the Dana Commercial Vehicle Warranty Manual for time and mileage examples and warranty information,
requirements, limits, and exclusions.
• Drive Axle Seals (Pinion, Input, Output) limited to 3 years / 350,000 miles.
July 2012, Rev. 1 24