Wheel end lubricants – Spicer Dana Commercial Vehicle Warranty User Manual
Page 33
Lubrication
Lubrication
Wheel End Lubricants
The standard lubricants specified by the Steer Product Engineering group are as follows:
Note: See the line haul and vocational definitions for more information.
Product
Lubricant Type
SAE
Change Interval for Line
Haul
Change Interval for
Vocational
Wheel End
Mineral Oil
SAE 75W-90
100,000 miles [161,000
Km] or 1 year
30,000 miles [48,000
Km] or 6 months
Wheel End
Mineral Grease - NLGI #2
AW 2
100,000 miles [161,000
Km] or 1 year
30,000 miles [48,000
Km] or 6 months
LMS
®
-Low
Lube***
Synthetic Oil
SAE 50
250,000 miles [400,000
Km] or 1 year
250,000 miles [400,000
Km] or 1 year
LMS
®
-Lube
Free***
Synthetic Oil
SAE 50
None (only needed if tear
down)
None (only needed if
tear down)
LMS
®
-Low
Lube***
Semi-Fluid Synthetic Grease
Chevron Delo SF
50,000 miles [80,000 Km]
or 3 years
50,000 miles [80,000
Km] or 3 years
LMS
®
-Low
Lube***
Semi-Fluid Synthetic Grease
**
Mobilith SHC 007 50,000 miles [80,000 Km]
or 3 years
50,000 miles [80,000
Km] or 3 years
**Use of this grease requires a signed waiver from customer.
*** For easy identification, note that the Dana LMS-Low Lube brake uses a special “button head” grease fitting and the Dana
LMS
®
-Lube Free brake does not have a grease fitting.
July 2012, Rev. 1
28