Spicer approved lubricants, rev. 1, Steer axle lubricants, Lubricant specifications – Spicer Dana Commercial Vehicle Warranty User Manual
Page 31
Lubrication
Drive Axle Lubricants
Dana Recommends the Use of Spicer approved Lubricants for Extended Drain
Use the chart to locate the correct lubricant and change interval.
Note: See the line haul and vocational definitions for more information.
Steer Axle Lubricants
Use the chart to locate the correct lubricant and change interval.
Note: See the line haul and vocational definitions for more information.
Synthetic
or Mineral
Lubricant
SAE
Change Interval for Line Haul
Change Interval for Voca-
tional
Synthetic
SHAES 256 Rev C
SAE 75W-90
500,000 miles [800,000 Km] or
3 years
Synthetic
SHAES 256 Rev C
SAE 75W-90,
SAE 80W-140
120,000 miles [193,000 Km]
or 1 year
Mineral
MIL-L-2105E/J-2360,
API GL-5 Gear Oil, MIL-
PRF-2105E
75W, 75W-80,
75W-140
120,000 miles [193,000 Km] or
1 year
60,000 miles [96,500 Km] or
1 year
Type of Lubricant System
Lubricant
SAE
Change Interval for
Line Haul
Change Interval for
Vocational
Oil Bath
MIL-L-2105 E/J-2360
SAE 75W-90
80W-140
100,000 miles
[161,000 Km] or 6
months
Every 50 hours
Grease Packed****
Heavy-Duty, multipurpose
lithium based **
#2 grade
100,000 miles
[161,000 Km] or 1 year
25,000 miles [40,000
Km]
King Pin Grease
Heavy-Duty, multipurpose
lithium based **
#1 grade***
or #2 grade
25,000 miles [40,000
Km] or 6 months
Every 50 hours
** Do not mix with sodium base grease.
Do not use greases other than what is indicated above.
*** #1 grade is used for extreme cold.
**** Refer to OEM recommendations.
Lubricant Specifications
July 2012, Rev. 1
26