VEGA VEGABAR 17 - Manual (Page 16)

8 S nap the plug insert into the plug housing and insert the sensor
seal
Information:
N
ote the correct arrangement, see illustration
9 T
ighten the screws on the strain relief and cable entry
10 H ook in the cover and push onto the plug connection, tighten
cover screw
11 P lug the plug insert with seal to VEGABAR 17 and tighten the
screw
T he electrical connection is finished.
5 .3 Wiring plan
1
2
3
+
-
1
Fig. 7: Wiring plan, angle plug connector according to ISO 4400, top view to
VEGABAR 17
1 Voltage supply and signal output
3
+
-
1
3
2
4
1
Fig. 8: Wiring plan, round plug connector M12 x 1, top view to VEGABAR 17
1 Voltage supply and signal output
Connection via connection cable with 4-pole socket M12 x 1
(accessory)
Angled plug connector
according to ISO 4400
Round plug connector
M12 x 1
16 VEGABAR 17
5 C onnecting to power supply
27636
-EN
-120531