VEGA VEGABAR 75 4 … 20 mA_HART - Manual (Page 13)

1
2
Fig. 3: Temperature ranges
1
Process temperature
2 Ambient temperature
4 .2 Mounting steps
S
eal the thread with teflon, hemp or a similar resistant seal
material on the process fitting thread 1½ NPT.
à Screw VEGABAR 75 into the welded socket. Tighten the
hexagon on the process fitting with a suitable wrench.
W
rench size, see chapter "Dimensions".
S eal the flange connections according to DIN/ANSI with a
suitable, resistant seal and mount VEGABAR 75 with suitable
screws.
U
se the seal suitable for the respective process fitting. You can
find the components in the line of VEGA accessories in the
supplementary instructions manual "Welded socket and
seals".
Sealing/Screwing in threaded
versions
Sealing/Screwing in flange
versions
Sealing/Screwing in hygienic
fittings
VEGABAR 75 - 4 … 20 mA/HART 13
M ounting
28433
-
EN
-070718