VEGA VEGABAR 75 4 … 20 mA_HART - Manual (Page 6)

D uring the entire duration of use, the user is obliged to
determine the compliance of the required occupational safety
measures with the current valid rules and regulations and also
take note of new regulations.
2 .5 Safety approval markings and safety tips
T he safety approval markings and safety tips on the device
must be observed.
2 .6 CE conformity
VEGABAR 75 is in CE conformity with EMC (89/336/EWG),
fulfils NAMUR recommendation NE 21 and is in CE conformity
with LVD (73/23/EWG).
C
onformity has been judged according to the following
standards:
l
EMC:
-
E
mission EN 61326: 2004 (class B)
-
S usceptibility EN 61326: 2004 including supplement A
l
LVD: EN 61010-1: 2001
VEGABAR 75 is not subject to the pressure device guideline.
1)
2 .7 Fulfilling NAMUR recommendations
VEGABAR 75 fulfills the following NAMUR recommendations:
l
NE 21 ( interference resistane and emitted interference)
l
NE 43 ( signal level for failure information)
l
NE 53 ( compatibility sensor and indicating/adjustment
components)
VEGA instruments are generally upward and downward
compatible:
l
S
ensor software to DTM VEGABAR 75 HART
l
DTM VEGABAR 75 for adjustment software PACTware™
T he parameter adjustment of the basic sensor functions is
independent of the software version. The range of available
functions depends on the respective software version of the
individual components.
T
he software version of VEGABAR 75 HART can be read out
via PACTware™.
1) D ue to the flush diaphragm, no own pressure compartment is formed.
6 VEGABAR 75 - 4 … 20 mA/HART
F or your safety
28433
-EN
-070718