3 mounting steps with screwed connection – VEGA VEGAWELL 72 4 … 20 mA_HART User Manual
Page 14
M
ount VEGAWELL 72 with straining clamp as follows:
1
H
ang the straining clamp on a suitable wall hook
2
L
ower VEGAWELL 72 to the requested height
3
S
lide the clamping jaws upward and push the suspension
cable between them
4
H
old the suspension cable, push the clamping jaws
downward and fix them with a light blow
R
emoval is carried out in reverse order.
4
.3 Mounting steps with screwed connection
1
2
3
4
5
6
Fig. 4: Threaded fitting
1
Suspension cable
2
Seal screw
3
Cone bushing
4
Seal cone
5
Threaded fitting
6
Seal
M
ount VEGAWELL 72 with screwed connection as follows:
1
W
eld the welded socket into the vessel top
2
L
ower VEGAWELL 72 to the requested height by means
on the welded socket G1½ A or 1½ NPT on the vessel side
3
I
nsert the suspension cable from below into the open
screwed connection
4
S
lide the seal cone and the cone sleeve over the
suspension cable, fasten manually with the seal screw
14
VEGAWELL
72 • 4 … 20
mA/HART
4 M
ounting
27630
-EN
-080806