5 connecting to power supply, 1 preparing the connection – VEGA VEGADIS 12 User Manual
Page 11
5 Connecting to power supply
5.1 Preparing the connection
Always keep in mind the following safety instructions:
l
Connect only in the complete absence of line voltage
In hazardous areas you should take note of the appropriate
regulations, conformity and type approval certificates of the
sensors and power supply units.
VEGABOX 01 or VEGADIS 12 is connected with standard two-
wire cable without screen. An outer cable diameter of 5 … 9 mm
ensures the seal effect of the cable entry. If electromagnetic
interference is expected which is above the test values of
EN 61326 for industrial areas, we recommend the use of
screened cable.
Fig. 3: Connection of VEGADIS 12 to the sensor
Note safety instructions
Take note of safety
instructions for Ex
applications
Selecting connection cable
VEGADIS 12
11
Connecting to power supply
20591
-EN
-071128