VEGA VEGAPULS 63 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART - four-wire - Manual (Page 22)

6 I nsert the wire ends into the open terminals according to the wiring
plan
7 P ress down the opening levers of the terminals, you will hear the
terminal spring closing
8 C heck the hold of the wires in the terminals by lightly pulling on
them
9 C onnect the screen to the internal ground terminal, connect the
outer ground terminal to potential equalisation
10 T ighten the compression nut of the cable entry. The seal ring must
completely encircle the cable
11 C onnect the lead cable for power supply in the same way
according to the wiring plan, in addition connect the ground
conductor to the inner ground terminal.
12 S crew the housing cover back on
T he electrical connection is finished.
Fig. 15: Connection steps 5 and 6
5 .3 Wiring plan, double chamber housing
T he following illustrations apply to the non-Ex as well as to the Ex-d
version.
22 VEGAPULS 63 • 4 … 20 mA/HART - four-wire
5 C onnecting to power supply
28441
-EN
-120530