VEGA VEGAPULS 54K enamel - Manual (Page 7)

VEGAPULS 54K enamel 7
24 101-EN-041227
- + ESC
OK
2
4
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
4 ... 20 mA
Adjustment with detachable adjustment module. The
adjustment module can be plugged into the radar
sensor or into the external indicating instrument
VEGADIS 50.
Detachable adjustment module MINICOM
- +
ESC
OK
Tank 1
m (d)
12.345
Adjustment with the adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module with display, the adjustment
can be carried out in clear text dialogue. The
adjustment module can be plugged into the
radar sensor or into the optional, external
indicating instrument.
Unauthorised sensor adjustments can be
prevented by removing the adjustment mod-
ule.
2
2
Adjustment with the PC on the 4 … 20 mA signal and
supply cable to the PLC or directly on the sensor
(figure: a two-wire sensor)
Product description
The PC can be connected at any measuring
site in the system or directly to the signal
cable. It is connected by means of the two-
wire PC interface converter VEGACONNECT 3
to the sensor or the signal cable. The adjust-
ment and parameter data can be saved with
the adjustment software on the PC and can
be protected by passwords. On request, the
adjustments can be quickly transferred to
other sensors.
PLC
Adjustment with the PC
The set-up and adjustment of the radar sen-
sors is generally done on the PC with the
adjustment software PACT
ware TM . The pro-
gram leads quickly through the adjustment
and parameter setting by means of pictures,
graphics and process visualisations.
Adjustment with the PC on the analogue 4 … 20 mA
signal and supply cable or directly on the sensor
(four-wire sensor)
2
2
4 ...20 mA