VEGA VEGAMET 614 - Manual (Page 19)

VEGAMET 614 19
Settings in the "Reduced menu“
Name measurement loop
You can modify the meas-
urement loop name "TAG-
No. 1“, if you want a more
useful designation.
Two lines with six figures
each are available. To do
this, move to the menu item
"TAG name …“.
Push [+] or [–] once. The first char-
acter of the measurement loop name,
in this example the letter T, flashes
(editing mode). Continue pushing the
[+] or [–] key, by doing this you scroll
through the alphabet, through the row of
numbers and through a list of characters.
When you have reached the re-
quested character, push [–>]. The
next character is activated and be-
gins flashing. Scroll again with [+]
and [–] to the requested character. With [–>]
you can move to the next character.
If you have finished the last position
of the name and you have "written"
the name of the measurement loop in
this way, you have to push [OK] to
save the setting. If you quit the menu item
without saving, the name of the measurement
loop is again "TAG-No. 1“.
In the display of measured value and
in all other menu items in which the
measurement loop name is shown,
you will now find the new designation.
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion
TAG-
Name
TAG -
No. 1
TAG-
Name
T AG -
No. 1
TAG-
Name
T
A G -
No. 1
TAG-
Name
Ves.4
Hall
3
Ves.4
Hall3
%
27.8
6 Settings in the "Reduced menu“
6.1 Configuration of measurement
loop
Choose sensor type
By default, VEGAMET 614 is configured for
connection to a hydrostatic pressure trans-
mitter. If, for example, you use a capacitive
electrode, you have to proceed as follows:
Move to the menu item "Sensor type
Hydrostatic“.
Push [+] or [–] once. The word "Hydrostatic“
flashes. You are now in the editing mode.
Continue pushing [+] or [–] until the display
shows "Sensor type capacitive“. You are still
in the editing mode.
Now push the [OK] key. By doing this, you
save the settings and quit the editing mode.
Meas.
value
indication TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
off
Langu-
age
Eng-
lish
TAG 1
to de
fault Reset
TAG 1
Delete
TAG 1
?
It is only possible to
modify the sensor type,
when a "Reset TAG 1“ was
carried out before.
Reset
OK ?
Reset
Now!
OK ?
capa-
citive
VEGADIF
Sensor
type
Hydro-
static