5 integration time, Settings in the "reduced menu – VEGA VEGAMET 614 User Manual
Page 23
VEGAMET 614
23
Settings in the "Reduced menu“
6.5 Integration time
TAG -
No. 1
m
2,341
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment
Signal
condit-
ioning
Scal-
ing
Integr
ation
time s
0
Meas.
value
indication
If the integration time is set to 0 s (factory
setting), each quick change of the product
surface (e.g. waves) will be immediately
detected and interpreted as level change. All
output values of VEGAMET will follow the
wave movements. To avoid this, the integra-
tion time can be increased (max.
600 s are possible with VEGAMET). The
higher the time adjustment, the slower the
measurement reacts.
Choose the term "Height“ in this
menu item (with keys [+], [–] and
[OK]).
If you have chosen "Height“ in the
previous menu item, you get a
choice of several units (mm, dm,
cm, m, yard…). Choose m (with the
keys [+], [–] and [OK]).
You can now see the scaled value in
the measured value display
Percent
Pressure
Mass
prop.
to
Height
Unit
m
dm
cm
….