VEGA VEGASON 66 Emitting electronics - Manual (Page 5)

3 P roduct description
3 .1 Configuration
The scope of delivery encompasses:
l
Emitting electronics
l
4 pcs. Torx screws size 15 (with version A)
l
Documentation
-
this operating instructions manual
The emitting electronics is available in three versions suitable
to the respective mechanical version of VEGASON 64, 65 and
66:
l
For version A (compact with flange)
l
For version B (with swivelling holder)
l
For versions C and D (separate with swivelling holder or
thread)
1 2 3
Fig. 1: Versions of the emitting electronics for VEGASON 64, 65, 66
1
For version A
2 For version B
3 For version C or D
3 .2 Principle of operation
The emitting electronics VEGASON 64, 65, 66 is suitable as
replacement unit for VEGASON 64, 65 and 66 ultrasonic
sensors. It is located between sensor housing and transducer.
With version A, the emitting electronics is mounted directly to
the flange adapter, with version B to the transducer tube. With
version C and D, it is mounted separately and connected via a
connection cable to the transducer.
Scope of delivery
Versions
Area of application
Emitting electronics - for VEGASON 64, 65, 66 5
Product description
30205
-
EN
-070510