VEGA VEGASON 65 4 … 20 mA_HART four-wire - Manual (Page 40)

6.6 Saving the parameter adjustment data
I t is recommended noting the adjusted data, e.g. in this operating
instructions manual and archive them afterwards. They are hence
available for multiple use or service purposes.
I
f VEGASON 65 is equipped with an indicating and adjustment
module, the most important data can be read out of the sensor into
indicating and adjustment module. The procedure is described in the
operating instructions manual "Indicating and adjustment module" in
the menu item "Copy sensor data". The data remain there permanently
even if the sensor power supply fails.
I f it is necessary to exchange the sensor, the indicating and adjustment
module is inserted into the replacement instrument and the data are
written into the sensor under the menu item "Copy sensor data".
40 VEGASON 65 • 4 … 20 mA/HART four-wire
6 S et up with the indicating and adjustment module PLICSCOM
28782
-EN
-081127