VEGA VEGASON 63 Profibus PA - Manual (Page 12)

12
4 Mounting
VEGASON 63 • Profibus PA
28786-EN-130417
is expected. In this case, we recommend repeating a false echo stor-
age later with existing buildup.
1 2
> 200 mm
Fig. 5: Mounting on round vessel tops
1 Reference plane
2 Vessel center or symmetry axis
In vessels with conical bottom it can be advantageous to mount the
sensor in the center of the vessel, as measurement is then possible
down to the lowest point of the vessel bottom.
Fig. 6: Vessel with conical bottom
Preferably the transducer should be mounted flush to the vessel top.
If the reflective properties of the medium are good, you can mount
VEGASON 63 on a socket piece. You will find recommended values
for socket heights in the following illustration. The socket end should
be smooth and burr-free, if possible also rounded. Carry out a false
echo storage.
Socket