VEGA VEGASON 64 Foundation Fieldbus User Manual
Page 36
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
2)
Function
Reset value
Max. adjustment
0 m(d)
Min. adjustment
Meas. range end in m(d)
3)
Medium
Liquid
Vessel form
not known
Damping
0 s
Linearisation
linear
Sensor-TAG
Sensor
Displayed value
AI-Out
Unit of measurement
m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function
Reset value
Language
no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
4)
Pointer
The min. and max. distance and temperature values are reset to the
actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2)
Sensor-specific basic adjustment.
3)
Depending on the sensor type, see chapter "Technical data".
4)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
Optional settings
36
VEGASON
64 • Foundation Fieldbus
6 Set up with the indicating and adjustment module PLICSCOM
28793
-EN
-081127