VEGA VEGASON 64 Foundation Fieldbus - Manual (Page 46)

9 Dismounting
9.1 Dismounting steps
Danger:
The individual wires of the transducer cable carry a voltage of approx.
70 V during operation (see chapter "Mounting preparations"). There-
fore dismount VEGASON 64 only in complete absence of line voltage.
Warning:
Before separating the transducer cable (see chapter "Mounting
preparations", example see illustration below), idle condition must be
provided. Non-observance can cause damage to the electronics!
1
2 3
Fig. 28: Plug connector between transducer and socket of electronics housing
1
Socket electronics housing2
Plug connector on the transducer cable3
Connection piece, transducer tube
Take note of chapters "Mounting" and "Connecting to power supply"
and carry out the listed steps in reverse order.
9.2 Disposal
The instrument consists of materials which can be recycled by
specialised recycling companies. We use recyclable materials and
have designed the electronics to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE directive 2002/96/EG and
the respective national laws. Pass the instrument directly on to a
specialised recycling company and do not use the municipal collecting
points. These may be used only for privately used products according
to the WEEE directive.
46 VEGASON 64 • Foundation Fieldbus
9 Dismounting
28793
-EN
-081127