VEGA VEGAWELL 51 4 … 20 mA - Manual (Page 15)

4 .3 Mounting steps with screwed connection
1
2
3
4
5
6
Fig. 4: Threaded fitting
1 Suspension cable
2 Seal screw
3 Cone bushing
4 Seal cone
5 Threaded fitting
6 Seal
M
ount VEGAWELL 51 with screwed connection as follows:
1 W eld the welded socket into the vessel top
2 L ower VEGAWELL 51 to the requested height by means
on the welded socket G1½ A or 1½ NPT on the vessel side
3 I nsert the suspension cable from below into the open
screwed connection
4 S
hift the seal cone and the cone sleeve to the suspension
cable, fasten manually with the seal screw
5 S crew the screwed connection into the socket, fasten with
SW 30 and then fasten seal screw with SW 19
H ow to correct the height:
1 L
oosen seal screw with SW 19
2 S
hift seal cone and cone sleeve to the requested position
on the cable
3 F
asten the seal screw
R
emoval is carried out in reverse order.
VEGAWELL 51 • 4 … 20 mA 15
M ounting
32465
-
EN
-080604