VEGA VEGAPULS 67 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Manual (Page 59)

Diagram, adjustment
The following illustration shows the function of the adjustment.
Secondary_value_1
Calibration
Lowest Point
Calibration
Highest Point
Sensor_value
cal_level_lo
cal_level_hi
Calibration
Lowest Point
Calibration
Highest Point
Sensor reference plane
cal_level_lo [%]
cal_level_hi [%]
Fig. 35: Adjustment VEGAPULS 67
Parameter list
The following list contains the most important parameters and their meaning:
l primary_value
-
Process value after min/max-adjustment and linearization. Selected as input to AIFB by setting
'C
hannel' = 1. Unit derives from 'Primary_value_unit'
l primary_value_unit
-
Selected unit code for "primary_value"
l secondary_value_1
-
Value after min/max-adjustment (level + level offset). Selected as input to AIFB by setting
'C
hannel' = 2. Unit derives from 'Secondary_value_1_unit'
l secondary_value_1_unit
-
Selected unit code for "secondary_value_1"
l secondary_value_2
-
Sensor value + sensor offset. Selected as input to AIFB by setting 'Channel' = 3. Unit derives
from 'Secondary_value_2_unit'
VEGAPULS 67 • Foundation Fieldbus 59
10 Supplement
32941
-
EN
-100514