VEGA VEGAFLEX 66 (-110…+400°C) Foundation Fieldbus - Manual (Page 33)

Function Reset value
Max. adjustment Distance, upper dead zone
Min. adjustment Distance, supplied sensor length
Min. adjustment - Cable version Distance, lower dead zone
Integration time ti 0 s
Linearisation linear
Sensor-TAG Sensor
Display AI-Out 1
The values of the following menu items are not reset to the
reset values (see chart) with "Reset":
Function Reset value
Language no reset
Factory setting
Like basic adjustment, furthermore special parameters are
reset to default values.
3)
Pointer
The min. and max. distance values are reset to the actual
value.
Additional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
3) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Optional settings
VEGAFLEX 66 • Foundation Fieldbus 33
6 Set up with the indicating and adjustment module PLICSCOM
32765
-
EN
-080716