VEGA VEGAFLEX 62 Foundation Fieldbus - Manual (Page 12)

keep in mind that measurement down to the tip of the probe is not
possible. The exact value of the min. distance (lower dead band) is
stated in chapter "Technical data".
Fig. 3: Vessel with conical bottom
In case of difficult installation conditions, the probe can be also
mounted laterally. For this purpose, adapt the rod with rod extensions
or bow-shaped segments.
The sensor must be readjusted to compensate the resulting running
time changes.
Rod extensions
12 VEGAFLEX 62 • Foundation Fieldbus
4 Mounting
31840
-EN
-100426