VEGA PLICSRADIO T62 Wireless emitting unit - Manual (Page 27)

27
7 Setup with PACTware
PLICSRADIO T62 • Wireless emitting unit (multiple channel)
32624-EN-130228
7 Setup with PACTware
7.1 Connect the PC
As an alternative to the setup via display and adjustment module, the
parameter adjustment is also possible via PC. For connection you
require the VEGACONNECT 4 interface converter. This converter can
be inserted into PLICSRADIO T62 instead of the display and adjust-
ment module. The connection to the PC is carried out via the USB
interface. The parameter adjustment of a connected VEGA HART
sensor can be also carried out via this connection. Further information
is specified in the operating instructions manual of "VEGACONNECT
4".
Note:
Connection of VEGACONNECT or a HART modem directly to the
4 … 20 mA sensor cable is not possible.
2
1
Fig. 14: Installation and connection in plics ® device
1 USB cable
2 plics ® device
7.2 Parameter adjustment with PACTware
As an alternative to the integrated display and adjustment unit, the
adjustment can be also carried out via a Windows PC. For this, the
configuration software PACTware and a suitable instrument driver
(DTM) according to the FDT standard are required. The current PACT-
ware version as well as all available DTMs are compiled in a DTM
Collection. Furthermore, the DTMs can be integrated into other frame
applications compliant with the FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
Connection of the PC via
VEGACONNECT
Prerequisites