VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus User Manual
Page 16
Advertising
Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product.
Fig. 7: Inflowing liquid
The socket piece should be dimensioned in such a way that the
antenna end protrudes at least 10 mm (0.4 in) out of the socket.
ca.
10 mm
Fig. 8: Recommended socket mounting
Align the sensor in liquids as vertical as possible to the product surface
to achieve optimum measurement.
Inflowing medium
Socket
Sensor orientation
16
VEGAPULS
66 enamel • Foundation Fieldbus
4 Mounting
33336
-EN
-090305
Advertising