VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus - Manual (Page 38)

l Vessel form
l Damping
l Linearisation curve
l Sensor-TAG
l Displayed value
l Unit of measurement
l Language
The following safety-relevant data are not read out or written:
l PIN
Copy sensor data
Copy sensor data?
Basic adjustment
If the "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
2)
Function Reset value
Max. adjustment 0 m(d)
Min. adjustment 30 m(d) (VEGAPULS 61, 63, 65)
35 m(d) (VEGAPULS 62, 66)
70 m(d) (VEGAPULS 68)
Medium Liquid
Vessel form not known
Damping 0 s
Linearisation linear
Sensor-TAG Sensor
Displayed value AI-Out
Extended settings None
Unit of measurement m(d)
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function Reset value
Language no reset
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values.
3)
2) Sensor-specific basic adjustment.
3) Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset
38 VEGAPULS 66 enamel • Foundation Fieldbus
6 Set up with the indicating and adjustment module PLICSCOM
33336
-EN
-090305