VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus - Manual (Page 44)

Necessary components:
l VEGAPULS 66
l PC with PACTware and suitable VEGA DTM
l VEGACONNECT
l Power supply unit or processing system
7.2 Parameter adjustment with PACTware
Further setup steps are described in the operating instructions manual
"DTM C
ollection/PACTware" attached to each CD and which can also
be downloaded from our homepage. A detailed description is available
in the online help of PACTware and the VEGA DTMs.
Note:
Keep in mind that for setup of VEGAPULS 66, DTM-Collection in the
actual version must be used.
All currently available VEGA DTMs are provided in the DTM Collection
on CD and can be obtained from the responsible VEGA agency for a
token fee. This CD includes also the up-to-date PACTware version.
The basic version of this DTM Collection incl. PACTware is also
available as a free-of-charge download from the Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7.3 Parameter adjustment with AMS™
For VEGA sensors, instrument descriptions for the adjustment
program AMS™ are available as DD. The instrument descriptions are
already implemented in the current version of AMS™. For older
versions of AMS™, a free-of-charge download is available via Internet.
Go via www.vega.com and "Downloads" to the item "Software".
7.4 Saving the parameter adjustment data
It is recommended to document or save the parameter adjustment
data. They are hence available for multiple use or service purposes.
The VEGA DTM Collection and PACTware in the licensed, profes-
sional version provide suitable tools for systematic project documen-
tation and storage.
44 VEGAPULS 66 enamel • Foundation Fieldbus
7 Setup with PACTware and other adjustment programs
33336
-EN
-090305