VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) enamel Foundation Fieldbus - Manual (Page 6)

During the entire duration of use, the user is obliged to determine the
compliance of the required occupational safety measures with the
current valid rules and regulations and also take note of new
regulations.
2.5 Safety label on the instrument
The safety approval markings and safety tips on the device must be
observed.
2.6 CE conformity
This device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of www.vega.com.
2.7 Fulfillment of NAMUR recommendations
With respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding indicating and
adjustment components. VEGA instruments are generally upward and
downward compatible.
l Sensor software for DTM VEGAPULS 66 HART, PA or FF
l DTM VEGAPULS 66 for adjustment software PACTware
l Indicating and adjustment module for sensor software
The parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
The software version of VEGAPULS 66 can be determined as follows:
l via PACTware
l on the type label of the electronics
l via the indicating and adjustment module
You can view all software histories on our website www.vega.com.
Make use of this advantage and get registered for update information
via e-mail.
2.8 FCC and IC conformity (only for USA/Canada)
VEGAPULS 66 is FCC and IC approved:
l FCC ID: O6QPULS6566
l IC: 3892A-PS6566
Modifications not expressly approved by VEGA will lead to expiry of
the operating licence according to FCC.
VEGAPULS 66 is in conformity with part 15 of the FCC regulations.
Take note of the respective operating regulations:
6 VEGAPULS 66 enamel • Foundation Fieldbus
2 For your safety
33336
-EN
-090305