VEGA VEGABAR 55 4 … 20 mA - Manual (Page 44)

44
9 Supplement
VEGABAR 55 • 4 … 20 mA
36733-EN-130321
Ʋ Span -120 … +120 % 7)
Ʋ Difference between zero and span max. 120 % of the nominal range
Recommended max. turn down 10 : 1 (no limitation)
Nominal measuring ranges and overload capability in bar/kPa
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
0 … +0.1 bar/0 … +10 kPa
+15 bar/+1500 kPa -1 bar/-100 kPa
0 … +0.2 bar/0 … +20 kPa +20 bar/+2000 kPa -1 bar/-100 kPa
0 … +0.4 bar/0 … +40 kPa +30 bar/+3000 kPa -1 bar/-100 kPa
0 … +1 bar/0 … +100 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
0 … +2.5 bar/0 … +250 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +5 bar/0 … +500 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +10 bar/0 … +1000 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +25 bar/0 … +2500 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … 0 bar/-100 … 0 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-1 … +1.5 bar/-100 … +150 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … +5 bar/-100 … +500 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … +10 bar/-100 … +1000 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … +25 bar/-100 … +2500 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-0.05 … +0.05 bar/-5 … +5 kPa +15 bar/+1500 kPa -1 bar/-100 kPa
-0.1 … +0.1 bar/-10 … +10 kPa +20 bar/+2000 kPa -1 bar/-100 kPa
-0.2 … +0.2 bar/-20 … +20 kPa +30 bar/+3000 kPa -1 bar/-100 kPa
-0.5 … +0.5 bar/-50 … +50 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
Absolute pressure
0 … 1 bar/0 … 100 kPa
35 bar/3500 kPa 0 bar abs.
0 … 2.5 bar/0 … 250 kPa 50 bar/5000 kPa 0 bar abs.
0 … 5 bar/0 … 500 kPa 50 bar/5000 kPa 0 bar abs.
0 … 10 bar/0 … 1000 kPa 50 bar/5000 kPa 0 bar abs.
0 … 25 bar/0 … 2500 kPa 50 bar/5000 kPa 0 bar abs.
Nominal measuring ranges and overload capability in psig
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
7) Values less than -1 bar cannot be set.