VEGA VEGABAR 54 4 … 20 mA - Manual (Page 6)

6
2 For your safety
VEGABAR 54 • 4 … 20 mA
36725-EN-130321
2.6 CE conformity
This device fulfills the legal requirements of the applicable EC guide-
lines. By attaching the CE mark, VEGA provides a confirmation of
successful testing. You can find the CE conformity declaration in the
download area of "www.vega.com".
2.7 Measuring range - permissible process
pressure
Due to the application, a measuring cell with a measuring range
higher than the permissible pressure range of the process fitting may
have been integrated. The permissible process pressure is stated with
"Process pressure" on the type label, see chapter 3.1 "Configuration".
For safety reasons, this range must not be exceeded.
2.8 Fulfillment of NAMUR recommendations
With respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding display and adjust-
ment components. VEGA instruments are generally upward and
downward compatible.
•
Display and adjustment module for sensor software
The parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
2.9 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and op-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.
2.10 Environmental instructions
Protection of the environment is one of our most important duties.
That is why we have introduced an environment management system
with the goal of continuously improving company environmental pro-
tection. The environment management system is certified according
to DIN EN ISO 14001.
Please help us fulfill this obligation by observing the environmental
instructions in this manual:
•
Chapter "Packaging, transport and storage"
•
Chapter "Disposal"