3 wiring plan – VEGA VEGABAR series 80 External housing User Manual
Page 11
Advertising
11
5 Connect the sensor to the external housing
External housing • For pressure transmitter VEGABAR series 80
45081-EN-131119
6. Tighten the compression nut of the cable entry gland. The seal
ring must completely encircle the cable
7. Attach the mounting plate again and tighten the screws
The electrical connection of the sensor to the external housing is
finished.
You find the electrical connection of the electronics module in chapter
"Wiring plan" or in the operating instructions manual of the respetive
sensor.
5.3 Wiring plan
1
2
3
Fig. 7: External housing in conjunction with VEGABAR 81, 82, 83
Overview - VEGABAR 81,
82, 83
Advertising