VEGA VEGAFLEX 83 4 … 20 mA_HART two-wire Rod and cable probe - PFA insulated With SIL qualification - Manual (Page 20)

20
4 Mounting
VEGAFLEX 83 • 4 … 20 mA/HART two-wire
44228-EN-130823
In case of difficult installation conditions, for example in a socket, the
probe can be adapted respectively with a rod extension.
Let the probe length determine automatically by the instrument to
compensate the resulting running time changes.
You can find further information in the supplementary instructions of
the rod extension.
To compensate the normal bias voltage loss due to the seal materials,
you have to use also disc springs in addition to the flange screws for
fastening PTFE plated flanges.
The flange screws of VEGAFLEX 83 must always be tightened with
a torque of approx. 60 Nm (44 lbf ft) so that the PTFE washer seals
reliably.
Rod extension
Torque with PTFE plated
flanges