Milton CAT 990H - Manual (Page 17)

17
Operating Specifications
Rated Payload 15 tonnes 16.5 tons
Operating Weight 77 842 kg 171,642 lb
Bucket Capacity Range 8.4-9.2 m 3 11-12 yd 3
Static Tipping Load, Full Turn 38 243 kg 84,311 lb
Static Tipping Load, Full Turn – HL 39 048 kg 86,085 lb
Dump Clearance 3952 mm 13 ft
Breakout Force 583.6 kN 131,194 lb
Operating Weight – HL 83 252 kg 183,539 lb
Breakout Force – HL 536 kN 120,498 lb
Articulation Angle 35°
Transmission
Transmission Type Powershift
Forward 1 7 km/h 4.35 mph
Forward 2 12.8 km/h 7.95 mph
Forward 3 22.4 km/h 13.92 mph
Reverse 1 7.9 km/h 4.91 mph
Reverse 2 14.1 km/h 8.76 mph
Reverse 3 24.8 km/h 15.41 mph
Converter Drive – Forward 1 7 km/h 4.3 mph
Converter Drive – Forward 2 12.1 km/h 7.5 mph
Converter Drive – Forward 3 20.8 km/h 12.9 mph
Converter Drive – Reverse 1 7.7 km/h 4.8 mph
Converter Drive – Reverse 2 13.4 km/h 8.3 mph
Converter Drive – Reverse 3 22.8 km/h 14.2 mph
Direct Drive – Forward 1 Lock-up disabled
Direct Drive – Forward 2 12.8 km/h 7.9 mph
Direct Drive – Forward 3 22.4 km/h 13.9 mph
Direct Drive – Reverse 1 7.9 km/h 4.9 mph
Direct Drive – Reverse 2 14.1 km/h 8.8 mph
Direct Drive – Reverse 3 24.8 km/h 15.4 mph
Hydraulic System – Lift/Tilt
Number of Lift Cylinders 2
Number of Tilt Cylinders 1
Hydraulic Cycle Time
Raise 9.2 Seconds
Dump 2.9 Seconds
Lower Float Down (Empty) 3.8 Seconds
Total Hydraulic Cycle Time 15.9 Seconds
Engine
Engine Model Cat C27 ACERT™
Gross Power 512 kW 687 hp
Net Power 468 kW 627 hp
Net Power – Caterpillar 468 kW 627 hp
Net Power – EEC 80/1269 468 kW 627 hp
Net Power – ISO 9249 468 kW 627 hp
Net Power – SAE J1349 463 kW 621 hp
Net Power – DIN 70020 650 PS
Bore 137 mm 5.4 in
Stroke 152 mm 6 in
Displacement 27.1 L 1,666 in 3
• These ratings apply at 2,000 rpm when tested under the
specified standard conditions for the specified standard.
• Power rating conditions are based on standard air conditions
of 25° C (77° F) and 99 kPa (29.32 in Hg) dry barometer, used
35° API gravity fuel having an LHV of 42 780 kJ/kg (18,390 Btu/lb)
when used at 30° C (86° F) [ref. a fuel density of 838.9 g/L
(7.001 lb/gal).
• Net power advertised is the power available at the flywheel
when the engine is equipped with fan, air cleaner, muffler
and alternator.
• No derating required up to 3300 m (11,000 ft) altitude.
990H Wheel Loader specifications
Engine Torque (N
•
m)
Engine Power (kW)
BSFC (gm/kW-hr)
Gross
Net
2500 2000 500 1000
1000
1500
2000
2500
500
0
-500
600
500
400
300
200
0
100
-100
350
300
Engine Speed (RPM)
200
250
150
100
50
0
738
1106
1475
1844
369
0
-369
805
671
536
402
268
0
134
-134
.575
.492
.329
.411
.246
.164
.082
.0
1500
3000
3500
2213
2581
Engine Power (Bhp)
Engine Torque (ft
•
lb)
BSFC (lb/Bhp-hr)