Milton CAT 990H - Manual (Page 18)

18
Buckets
Bucket Capacities 8.4-9.2 m 3 (11-12 yd 3 )
Axles
Maximum Single-Wheel Rise 572 mm 22.5 in
and Fall
Front Fixed
Rear Oscillating
Oscillation Angle ±11°
Brakes
Brakes Meet SAE/ISO 3450 1996
Cab
Cab – ROPS/FOPS Meets SAE and
ISO standards
Sound Performance Meets ANSI, SAE and
ISO standards
• Cat cab Rollover Protective Structure (ROPS/FOPS)
are standard.
• Standard air conditioning system contains environmentally
friendly R134a refrigerant.
• ROPS meets SAE J1040 APR88 and ISO 3471:1994 criteria.
• FOPS meets SAE J231 JAN81 and ISO 3449:1992
Level II criteria.
• The operator sound exposure Leq (equivalent sound pressure
level) measured according to the work cycle procedures
specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab
offered by Caterpillar, when properly installed, maintained
and tested with the doors and windows closed.
• Hearing protection may be needed when operating with an
open operator station and cab (when not properly maintained
or doors/windows open) for extended periods or in noisy
environment.
• The exterior sound pressure level for the standard machine
measured at a distance of 15 m (49.2 ft) according to the test
procedures specified in SAE J88 JUN86 mid-gear-moving
operation is 82 dB(A).
• The sound power level is 116 dB(A) measured according
to the dynamic test procedure and conditions specified
in ISO 6395:1988/Amd. 1:1996 for a standard machine
configuration.
• For “CE” marked configurations, the labeled sound power
level is 114 dB(A) measured according to the test procedures
and conditions specified 2000/14/EC.
Service Refill Capacities
Fuel Tank 1074 L 284 gal
Cooling System 190 L 50.2 gal
Crankcase 95 L 25 gal
Transmission 110 L 29 gal
Differentials and Final Drives – Front 271 L 71.6 gal
Differentials and Final Drives – Rear 261 L 68.9 gal
Hydraulic System (tank only) 174 L 45.97 gal
Hydraulic System – Lift/Tilt 435 L 113 gal
and Brakes
Hydraulic System – Steering 194 L 50.5 gal
and Engine Cooling Fan
Hydraulic System (including tank) 435 L 114.91 gal
Dimensions
Height to Top of Exhaust Stacks 4726 mm 15 ft 7 in
Height to Top of ROPS/FOPS 5070 mm 16 ft 8 in
Ground Clearance 478 mm 1 ft 8 in
Reach at Max. Lift/Dump – Std 1799 mm 5 ft 11 in
Reach at Max. Lift/Dump – HL 2540 mm 8 ft 4 in
Clearance at Max. Lift/Dump – Std 4135 mm 13 ft 9 in
Clearance at Max. Lift /Dump – HL 4518 mm 14 ft 10 in
Wheel Base Length 4600 mm 15 ft 2 in
Overall Length – Std 12 839 mm 42 ft 2 in
Overall Length – HL 13 578 mm 44 ft 8 in
Width Over Tires 4071 mm 13 ft 4 in
Turning Circle – Std 20 740 mm 68 ft 2 in
Full Turn Static Tipping Load at 35° 38 243 kg 84,311 lb
Turning Circle – HL 21 514 mm 70 ft 8 in
Straight Static Tipping Load – Std 43 392 kg 93,457 lb
Straight Static Tipping Load – HL 44 152 kg 97,338 lb
Hinge Pin Height at Full Lift – Std 5866 mm 19 ft 3 in
Hinge Pin Height at Full Lift – HL 6432 mm 21 ft 2 in
Tread Width 3050 mm 10 ft
• 990H dimensions based on 9.2 m 3 (12 yd 3 ) bucket with teeth
and segments
990H Wheel Loader specifications