Milton CAT 990H - Manual (Page 22)

22 990H Wheel Loader specifications
High Lift
Spade Spade High HD
Bucket Type BOCE HDLT & BOS Abrasion Quarry
Heaped Capacity m 3 8.6 8.6 8.6 8.6
yd 3 11.25 11.25 11.25 11.25
Struck Capacity m 3 7.3 7.3 7.3 7.3
yd 3 9.5 9.5 9.5 9.5
Bucket Width mm 4450 4450 4574 4450
ft-in 14'7" 14'7" 15'0" 14'7"
Clearance at Full Lift, 45 ° Dump SAE
mm 4761 4738 4780 4737
ft-in 15'7" 15'7" 15'8" 15'7"
Tooth tip mm N/A 4536 4523 4487
ft-in N/A 14'11" 14'10" 14'9"
Reach at Full Lift, 45 ° Dump SAE
mm 2033 1914 2002 1916
ft-in 6'8" 6'3" 6'7" 6'3"
Tooth tip mm N/A 2535 2574 2566
ft-in N/A 8'4" 8'5" 8'5"
Reach @ Level Arm and SAE mm 4116 3967 4092 3970
Level Bucket ft-in 13'6" 13'0" 13'5" 13'0"
Tooth tip mm N/A 4856 4893 4913
ft-in N/A 15'11" 16'1" 16'1"
Digging Depth - Bucket Level mm 190 210 210 210
inch 7.5" 8" 8" 8"
Overall Length Edge mm 13 260 13 286 13 226 13 288
ft-in 43'6" 43'7" 43'5" 43'7"
Tooth tip mm N/A 13 561 13 598 13 618
ft-in N/A 44'6" 44'7" 44'8"
Overall Height with Loaded Bucket mm 8638 8638 8638 8638
at Max. Lift and Racked ft-in 28'4" 28'4" 28'4" 28'4"
Clearance Circle @ Carry Edge mm 21 189 21 123 21 305 21 124
ft-in 69'6" 69'4" 69'11" 69'4"
Tooth tip mm N/A 21 338 21 481 21 398
ft-in N/A 70'0" 70'6" 70'2"
Tipping Load Str kg 43 349 42 866 40 674 41 720
(at operating weight) lb 95,585 94,520 89,686 91,993
35 ° art
kg 38 436 37 956 35 779 36 807
lb 84,751 83,693 78,893 81,159
Breakout Force kN 568 561 568 556
lb 127,800 126,225 127,800 125,100
Operating Weight† kg 81 597 81 939 83 789 83 019
lb 179,881 180,676 184,755 183,057
Operation Specifications: High Lift
* DST and BOS = Double Strap Teeth and Bolt-On Segments, BOCE = Bolt-On Cutting Edge.
** Dimensions measured to end of teeth and do not conform to SAE standard.
† Static tipping load and operating weight are based on standard machine configuration with 41.25/70-39 42 PR (L-5) tires, full fuel
lubricants and operator.
†† Measured 102 mm (4 in) behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732c.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE Standard
J732 JUN92 and J742 FEB85 govern loader ratings, denoted in the text by (§).