Buckets and bucket match – Milton CAT 990H User Manual
Page 8
Buckets. For the 990H range in size
from 8.4 m
3
(11 yd
3
) to 9.2 m
3
(12 yd
3
)
and may be configured for a variety
of impact and abrasive conditions.
All buckets are built with shell-tine
construction that resists twisting and
distortion and feature replaceable,
weld-on wear plates to protect the bottom
of the bucket. The integral rock guard
helps retain big loads while heavy-duty
pins and retainers provide durability.
Rock Buckets. Are available in spade-
edge or straight edge configurations.
Spade edge buckets use bolt-on segments
and are available from 8.4 m
3
(11 yd
3
)
to 9.2 m
3
(12 yd
3
). An 8.6 m
3
(12 yd
3
)
Straight Edge Rock is also available.
Each bucket accepts up to two sets of
sidebar protectors, features double-strap
adapters, easily changed bolt-on segments
and several tip options.
Heavy-Duty Quarry Bucket. Is available
as an 8.6 m
3
(11.2 yd
3
) capacity bucket
and is recommended for use in face
loading where moderate abrasion and
high impact is encountered. It features
additional wear protection items,
including: thicker base edge and adapters,
additional liners and wear plates, bolt-on
half arrow segments and four sidebar
protectors.
High Abrasion Bucket. Is available as an
8.6 m
3
(11.2 yd
3
) capacity bucket and is
recommended for use in face loading
where high abrasion and moderate
impact is encountered. This bucket
features additional wear protection items
including independently attached edge
and adapter covers, flush mount adapters,
additional liners and wear plates, four
sidebar protectors (two sets) and a thicker
base edge. Flush mount adapters provide
a smooth finish floor and reduce wear
on the adapters.
Cat buckets and Ground Engaging Tools provide the flexibility to match the machine.
Proper bucket and application match delivers increased stability and peak performance.
8
Buckets and Bucket Match